Description
Dali Oberon 7C : Active Wireless Speaker
The power amplification comprises two 50 Watt-peak, closed-loop Class-D power amplifiers chosen specifically for their sound quality and dynamic ability. One amplifier powers the high frequency driver, one powers the twin bass/mid drivers. The 100dB signal-to-noise ratio of the power amplifiers ensures that even the smallest detail in a quiet musical passage is reproduced with clarity and accuracy.
A separate small connection hub called the Sound Hub compact houses the built in Bluetooth receiver, digital and analogue inputs including a HDMI connection. The Sound Hub compact transmits all sources to OBERON C speakers using a proprietary 30 bit wireless protocol derived from the acclaimed DALI SOUND HUB.
The rear panel mounted OBERON 7 C electronic module incorporates a wireless receiver element and user setup interface, a DSP equalisation and crossover filter element, and a high efficiency two channel power amplifier with a closely integrated power supply.
Powering the amplifier is a custom designed, 65W(rms), very low noise switched mode supply that is able dynamically to share resources between the two amplifier channels in response to demand. The OBERON 7 C is, as a result, unusually frugal in terms of power consumption, yet gives nothing away in terms of dynamic punch when the music demands it.
With the OBERON 7 C and the SOUND HUB COMPACT, DALI has brought wireless Hi-Fi, that comfortably matches equivalent passive systems, within the reach of many more music lovers and audiophiles. They no longer have to choose between incredible sound quality and convenient integration. The OBERON 7 C and SOUND HUB COMPACT deliver both.
Specifications : Dali Oberon 7C
Frequency Range (±3 dB) (Hz) | 31 – 26,000 |
---|---|
Maximum SPL (dB) | 108 |
Crossover Frequency (Hz) | 2450 |
Crossover Principle | Full Active 24 Bit DSP |
High Frequency Driver | 1 × 29 mm Soft Dome Tweeter |
Low Frequency Driver | 1 × 7″ |
Enclosure Type | Bass Reflex (Rear ported) |
Reflex Tuning Frequency (Hz) | 40 |
Amplifier Output Power | (W) 2 × 50 W |
Amplifier Type | Class-D |
Wireless Input | Full 24 Bit / 96 kHz (Not Compressed) |
Wireless Audio RF Band (MHz) | 5150-5250 MHz and 5725-5875 MHz* |
Input Mains | Universal Mains 100-240 VAC |
Maximum Power Consumption (W) | 62 |
Standby Power Consumption (W) | 1 |
Networked Standby Power Consumption (W) | 1.25 |
Time To Enter Networked Standby | < 20 Minutes |
Dimensions (H × W × D) mm | 1015 × 200 × 340 |
Weight (kg/lb) | 14.8 kg / 9 lb Each |
Included Accessories | Quick Start Guide
Mains Cable Front Grille Rubber Feet Spikes |
Sound Compact
Wired Inputs | 2 × Optical
1 × Analogue Stereo (RCA) 1 × HDMI (ARC) |
---|---|
Input Impedance RCA (Ohm) | 7.2 k |
Max Input (RCA) | 3.0 Vp |
Maximum Optical Digital Input Resolution (Bits/kHz) | 24 / 192 |
Wired Outputs | 1 × SUB OUT (RCA with Detection) |
SUB Output Max Voltage (V) | 1.7 V RMS |
Wireless Inputs | BT 5.0, AAC, aptX, aptX HD |
Wireless Output | Full 24 Bit / 96 kHz (Not Compressed) |
Wireless Audio RF Band (MHz) | 5150-5250 MHz and 5725-5875 MHz |
Other Connections | 1 × IR Sensor Input
1 × USB-A power output (5 V/1.5 A) Service |
Power Input | 9V DC |
Maximum Power Consumption (W) | 2.8 W |
Standby Power Consumption (W) | 1.7 W |
Time To Enter Networked Standby | < 20 Minutes |
Dimensions (H × W × D) mm | 30 × 212 × 132 mm (1.2 × 8.4 × 5.2 in) |
Included Accessories | Quick start Guide
IR Remote Control 9V DC Power Supply (Universal 100-240 VAC) IR Sensor |
Weight (Kg/lb) | 0.5 Kg |