The ASR Emitter II drives also very complex and demanding loudspeakers like big flat panel speakers and extensively built and difficult to drive dynamic speakers to their maximum tonal performances – with an ASR Emitter II the music unfolds in your home with their full dynamic bandwidth :

from the quietest rustle of a leaf to the strength of the full orchestra!
The reproduction remains powerfully until top levels and the sound picture remains stable –

a result of the extraordinary strong voltage supply with a separate power supply unit per channel. With an Emitter you can listen music relaxed for many hours !

Through the very special construction with regulated gain and without preamplifier, the ASR Emitter II has already a very good resolution and sonic attack at very low levels.

The ASR Emitter II is available in two versions : ASR Emitter II and Emitter II Exclusive.

Already the ASR Emitter II is with hiss full strength and through his/its impressive size an exceptional amplifier. The ASR Emitter II Exclusive is even more extensively equipped and can be compared with most of the other advanced High End amplifiers.

A battery power supply is available for the input stage as option : with the Battery the ASR Emitter II Exclusive gets a more precise soundstage, the low frequencies have more power and precision.

Specifications : ASR Emitter II

• Two channel amplifier in the acrylic casing with input selector and volume control.
•   Class A/B technology with 20 Toshiba special Audio-MOSFETS with high impulse-capacity.
•   Mounting bars of the output Transistors made from massive brass for low resonance.
•   Volume control with relay attenuator in 1dB-Steps with balance and input level adjustment.
•   38 mm LED-Display available in yellow, white or blue, adjustable in many ways
•   5 high-level RCA inputs with adjustable input impedance, plus 1 direct input, 1 record output.
•   Gold plated massive brass RCA-sockets with Teflon isolation. Signal wires made from solid silver.
•   Large 100 amperes binding post for fork cable shoe copnnectors and 4 mm banana-plugs.
•   Protection-circuits against Overload, Clipping, DC Offset and Over-heating.
•   Circuit board 2,4 mm with 105u copper, parts of the two channels in mirror-symmetrical order.
•   2 external power supplies with 3 PM transformers and energy-management, separate rectifiers for each of the 8 voltages with very fast 2x 32 Schottky rectifiers.
•   Especially stable power supply casing of high-quality, very stable steel sheet metal.
•   Low loss Neozed high load fuse built in the power supply unit.
•   Stable industrial power connector from Harting for the connection to the amplifier-part.
•   Double shielded multi wire cables between amplifier and PSUs 2 m long, other lengths on request.
•   Power cable ASR Magic cord 150 cm with low loss 21A power connector at the power supply.
•   High-quality ASR Design remote control made from Corian for all functions.Additionally equipment of the ASR Emitter II Exclusive
   Buffering capacitors with total 957.520 uF with HV (High Voltage) Elkos
   Sub Out with adjustable full range output signal
   Balanced input with round Switchcraft XLR sockets with switchable input impedance.  Feets made from of massive brass chrome plated for the amplifier unit.

   2 Power supplies with improved equipment for higher performance. The 2x 3 PM Transformators are equipped with higher magnetic flux kernel-sheet metal, rectification with 56 Schottky rectifiers.

   A battery power supply for the input stage with 428.000 uF additional Buffer available as an Option.

  Data for both Emitters :

  •   Frequency range from 1 to 100.000 Hz with +/-1dB, 20-20.000 HZ +/- 0.2 dB
  •   Signal to noise ratio at the line input: > 86 dB  Input impedance 22 k to 500 Ohm
  •   Distortions: maximal 0,01 %  damping factor: greater than 1000  Rise time: <0,8 μs
  •   Power consumption in Standby: 0,6 VA, energy mode 90 VA, full power 200 VA

Dimension and weight : width x depth x height, depth at the power supply with plug in brackets

Emitter II: Main unit : 57 x 47 x 23 cm, 45 kg, 2x Power supply 46 x 32(42) x 16 cm, 31 kg Exclusive : Main unit : 57 x 47 x 23 cm, 51 kg, 2x Power supply 46 x 32(42) x 16 cm, 32 kg