Bel Canto Black The System

63 600 

Bel Canto Black The System

Description

Bel Canto Black The System : Integrated Amplifier

  • Black is like no other audio system in the world. It communicates the musical experience completely, staying true to the recorded event and conveying the passion the artist intended. Achieving this level of detailed playback required rethinking the way signal travels through the many stages of the electronics system. This was the challenge behind Black and the reason we took a different approach, designing a 3 chassis integrated hybrid system.

    Beautifully constructed from solid high grade billet aluminum, the modern look and feel of Black connects to all sources offering the highest level of flexibility and ease of use. Black creates an authentically present and naturally dimensional musical experience that will captivate you.

    The BLACK system architecture, consisting of the ASC2 System Controller and two MPS1 DAC/Amplifiers, incorporates numerous Bel Canto developed electronic and mechanical design solutions aimed at preserving the delicate audio signals. Digital processing and asynchronous interfaces driven from our Ultra Low Noise Master Clock circuitry ensures external noise from sources cannot corrupt, modify or color the original signal. Bel Canto’s ST fiber interconnect electrically isolates the ASC2 from the rest of the system, preventing random external noise from impacting sensitive analog stages in the MPS1 mono blocks. This eliminates ground loops and electrical noise pickup from environmental RF noise sources ranging from WiFi, Bluetooth, computers, cell phones or any other noise sources. Black is void of extraneous electrical noise; you only hear the music.

    Specifications : Bel Canto Black The System

  • Input Sensitivity: MM: 2.5mV to 5mV; MC: 0.25mV to 0.5mV
    Input Load: MM: 47K ohms; MC: 50, 100, 500, 1000
    RIAA Accuracy: +/-0.25dB, 50Hz – 15kHz
    THD+N: <0.01% 1kHz A-weighted
    SNR: >70dB A-weighted

    Line Inputs:

    Maximum Input: 2.2 Vrms RCA
    Input Impedance: 10K ohms RCA
    THD+N: 0.003%, 1KHz
    Dynamic Range: 110dB, A-weighted 20Hz-20KHz

    Performance:

    Dynamic Range: 127dB A-weighted
    THD+N: <0.001% 1W, 1kHz, 4 ohms
    IMD (CCIF): <0.001% 1W, 18.5:19.5kHz 1:1, 4 ohms

    General:

    Power Usage On: 15W
    Power Usage Off: 0.0W
    Power Requirement: 100-120VAC, 220-240VAC 50/60 Hz
    Dimensions: 19″ W x 12″ D x 3.8″ H (483 mm x 305 mm x 97 mm)
    Weight: 40lbs. (18.2 kg)
    • ASC2 Specifications

      Maximum Data Input Rates:

      24bit Data to 192KS/s: AES, SPDIF, TOSLINK
      24bits to 192KS/s and DSD64: 10/100 Ethernet
      24bits to 384KS/s and DSD64/128 (DoP): USB2 Audio
      Low Level Outputs:
      Line Level Analog 4.5Vrms with Bass Management
      ST Fiber Digital Outputs 2 – MPS1 Compatible (Stereo), 2 – Auxiliary
      MM/MC Input

    MPS1 Specifications

    Output Section:

    Maximum Power Output: 1200W-2ohm, 600W-4ohm, 300W-8ohm
    Minimum Load: 2 ohms
    Peak Output Current: 40 amperes
    Frequency Response: -3 dB 0Hz-50KHz, all loads
    Output connections: 1-pair WBT Nextgen 5-way binding posts, ST Multimode Glass Fiber

    Input Section:

    Input Connections: Stream ST Fiber
    Dynamic Range Stream Input: 128dB
    Balanced input impedance: 20Kohms

    Performance:

    THD+N: <0.001% 1W, 1KHz, 4 ohms
    IMD (CCIF): <0.001%, 1W, 18.5:19.5KHz 1:1, 4 ohms

    General:

    Power Usage On: 37W
    Standby Power Usage: 0.4W
    Internally Set Operating Voltages: 100-120VAC, 220-240VAC 50/60 Hz
    Dimensions: 19″ W x 14″ D x 3.8″ H (483 mm x 356 mm x 97 mm)
    Weight: 45lbs. (20.5 kg)

    Features and specifications are subject to improvements and changes without prior notice.