Description
mbl C15 : Power Amplifier Mono
Price for one piece
An amplifier is expected to distinguish all components of music with equal power and naturalness, to respond to every tone pitch and sound volume in a neutral and authentic fashion. In optimizing our amplifiers we do not confine ourselves to a small test signal or a single level or frequency range. Our tests encompass the entire range of musical performance, every contingency, every instrument and every voice. As a result, our LASA Mono Power amplifier boasts the same extremely low distortion factor throughout the whole audible frequency range and the whole range of performance. The music communicates without indication of its electronic or mechanical means of reproduction.
Specifications :mbl C15
General |
Weight
Dimensions (without cables)
Dimensions with packaging Line Voltage
Power consumption
22 kg / 48.5 lbs
W 45,0 cm / D 44,5 cm / H 14,5 cm
W 17.7 in / D 17.5 in / H 5.7 in
W 59,0 cm / D 54,0 cm / H 35,5 cm
W 23.2 in / D 21.3 in / H 21.9 in
230 Vac / 50 Hz or 115 Vac / 50/60 Hz
(single voltage, factory setting depending on country)
< 0.5 VA
< 50 VA
< 900 VA (w. 1 x 500 W @ 4 Ohm)
1 x RCA In, unbalanced
1 x XLR In, balanced (XLR H) / unbalanced (XLR L) 2 pairs Loudspeaker Binding Posts
2 x MBL SmartLink
500 W 280 W
> 500 W 85 Vp 36 Ap
10 kOhm/ 20 kOhm / 20 kOhm
100 mV / 200 mV / 100 mV for 1 W @ 4 Ohm 2.20 V / 4.40 V / 2.20 V for 500 W @ 4 Ohm 20 (26 dB) / 10 (20 dB) / 20 (26 dB)
In-Phase (RCA / XLR Pin 2)
127 dB (A) @ 500 W / 4 Ohm
100 dB (A) @ 1 W / 4 Ohm
126 dB (A) @ 2 V Input
126 dB (A) @ 2 V Input
< 10 Hz – 50 kHz
Typ. 0.01 % @ 5 W from 20 Hz … 20 kHz
> 100 (40 dB) @ 1 kHz / 4 Ohm
in stand by in idle Maximum
Inputs
Outputs Other
Connections |
Specifications |
Rated Power
Mono 4 Ohm
Mono 8 Ohm
Mono 2 Ohm Peak Output Voltage Peak Output Current
Input Impedance (RCA / XLR L / XLR H) Input Sensitivity (RCA / XLR L / XLR H) Rated Input Voltage (RCA / XLR L / XLR H) Voltage gain (RCA / XLR L / XLR H) Absolute Polarity
Signal / Noise Ratio @ Rated Output Signal / Noise Ratio @ 1 Watt Equivalent Input Noise – RCA Equivalent Input Noise – XLR Frequency Response
Distortion THD+N Damping Factor