NAD C368

1 199 

NAD C368

Catégories : , Étiquette : Marque:

Description

NAD C368 : Integrated Amplifier/DAC

With the C368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS® module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS Enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth Enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system.

Specifications : NAD C368

KEY FEATURES

  • 80W x 2 Continuous power into 8 or 4 Ohms
  • Bluetooth A2DP with aptX supported
  • MM Phono input
  • Analogue line inputs
  • SPDIF coax and optical inputs
  • Speaker A, Speaker B
  • Stereo or Bridge mode configuration
  • Preamp/Subwoofer out
  • Headphone amplifier
  • MDC Slots for future upgrades
  • IR Remote
  • Smartphone Control App
  • 12V Trigger in/out
  • IR in/out
  • RS-232 Serial port for control
  • Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

PREAMPLIFIER

Line Input, Pre Out

  • THD (20Hz-20kHz)
  • <0.005% at 2V out
  • Signal/Noise Ratio
  • >106dB (IHF; A-weighted, ref. 500mV out, unity gain)
  • Channel Separation
  • >80dB (1kHz); >70dB (10kHz)
  • Input Impedance (R and C)
  • 22 kilohm + 100pF
  • Maximum Input Signal
  • >4.5Vrms (ref. 0.1% THD)
  • Output Impedance
  • Source Z + 240 Ohm
  • Input Sensitivity
  • 93mV (ref. 500mV out, Volume maximum)
  • Frequency Response
  • ±0.03dB (20Hz-20kHz)
  • Maximum voltage output – IHF load
  • >4.5V (ref. 0.1% THD)
  • Tone Controls
  • Treble: ±7.0dB at 20kHz
    Bass: ±7.0dB at 60Hz
    Balance: -10dB

Phono Input, Pre Out

  • THD (20Hz-20kHz)
  • <0.01% at 2V out
  • Signal to Noise Ratio
  • >84dB (200 Ohm source; A-weighted, ref. 500mV out)
    >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)
  • Input Sensitivity
  • 1.44mV (ref. 500mV out, Volume maximum)
  • Frequency Response
  • ±0.3dB (20Hz-20kHz)
  • Maximum Input Signal at 1kHz
  • >80mVrms (ref. 0.1% THD)

Line Input, Headphone Out

  • THD (20Hz-20kHz)
  • <0.005% at 1V out
  • Signal/Noise Ratio
  • >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)
  • Frequency Response
  • ±0.3dB (20Hz-20kHz)
  • Channel Separation
  • >60dB at 1kHz
  • Output Impedance
  • 6 Ohms

GENERAL SPECIFICATIONS

  • Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)
  • >80W (ref. 20-20kHz at rated THD, both channels driven)
  • Continuous Output Power into 8 Ohms (Bridge Mode)
  • 300W (at 20-20kHz at THD 0.03%)
  • THD (20Hz-20kHz)
  • <0.03% (250mW to 80W, 8 Ohms and 4 Ohms)
  • Signal to Noise Ratio
  • >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
  • Clipping Power
  • >95W (at 1kHz 0.1% THD)
  • Clipping Power (Bridge Mode)
  • >315W (at 1kHz 0.1% THD)
  • IHF Dynamic Power
  • 8 Ohms 120W
    4 Ohms 200W
    2 Ohms 250W
  • IHF Dynamic Power (Bridge Mode)
  • 8 Ohms 500W
    4 Ohms 560W
    Peak Output Current
  • >20A (in 1 Ohm, 1ms)
  • Damping Factor
  • >300 (ref. 8 Ohms, 20Hz and 6.5kHz)
  • Frequency Response
  • ±0.3dB (20Hz-20kHz)
  • Channel Separation
  • >75dB (1kHz)
    >70dB (10kHz)
  • Input Sensitivity (for 80W in 8 Ohms)
  • Line In: 470mV; Digital In: 21% FS
  • Sample Rate
  • up to 24 bit/192kHz
  • Frequency Band
  • 2.402G-2.480G
  • Maximum Transmit Power (dBm)
  • 7dBm ±2dBm

POWER CONSUMPTION

  • at Auto Standby ON and Network Standby OFF
  • 0.5 Watts*
  • at Auto Standby ON and Network Standby ON
  • 1.2 Watts**
  • OFF mode (Power switched OFF)
  • 0.1 Watts

 

* – After 20 minutes of no user interface interaction and no active source input
** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input

NOTE: Bluetooth connectivity is always live when configured

WEIGHT & DIMENSIONS

  • Gross Dimensions (W x H x D)*
  • 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”
  • Net Weight
  • 7.8kg (17.2lb)
  • Shipping Weight
  • 10.1kg (22.3lb)