Description
Pre Audio Linear DE-1800NG : Turntable
With Cartridge Ortofon 2M RED
Classic conventional pivoting tonearm moves freely, it is “pulled” by the stylus across the record. Because of the move that it makes conventional tonearms have tracking distortions. Record players with linear/tangential tonearms have zero tracking distortion. The tonearm positions the cartridge at the same 90 degree angle at which the record were cut. In the past meany great constructions of record players with linear tonearm were complicated and heavy. In order for the linear tonearm to move, it was/is necessary that the arm is controlled by electric motors. This motors are pushing the arm across the record but the mechanical complexity of this models gives more points for failure. All models with linear tracking tonearm in Pre-audio constructions have low mass and simple construction. That allowed like in conventional pivoting tonearms that the tonearm is “pulled” by the stylus across the record. How efficient that solution is you can see on videos.
The set includes:
Turntable with equipment
User manual
Warranty
Invoice
Transport box
Tonearm:
A very low air pressure (0.030MPa) is needed for this turntable to work properly. The pressure is easily produced by a silent compressor, which is an inseparable part of the turntable.
The way the arm is operated on the air cushion is quite simple. Thanks to the pressure from the compressor, the arm bearing can detach and levitate in the air alongside the guide.
Due to the wide range of calibration options, the arm can support most MM /MC cartridges available on the market.
Motor:
A very quiet DC motor (12V) is used to drive the platter. The motor, which is located next to the acrylic platter, transmits the torque using two thin silicon belts.
The platter bearing consists of a sleeve made of bronze and a high-gloss polished axis. The whole platter is resting on two balls immersed in an oil bath. The bearing is made with such a high precision that an oil film is created between the two friction elements, further reducing friction and bearing noise.
It is possible to choose a magnetic platter bearing that is using very strong neodymium magnets.
The turntable can play discs recorded at 33 and 45 RPM. The control panel located on the side of the turntable changes speeds and fine-adjusts the rotation of the disc. As a standard, a high-quality power supply unit, located in the compressor, is coming with the turntable. This allows for the compressor to be controlled from the panel on the turntable.
Specifications : Pre Audio Linear DE-1800NG
Optional counterweight | cartridge weight 5 – 10g |
Pressure of cartridge | 5 – 30mN |
Drive | belt |
Motor | synchronic AC |
Gilt RCA, GND jack | gold plating |
Speed range | 33,33 / 45,11 r.p.m. |
Speed deviation | +/- 0,5% |
Speed flutter | +/- 0,1% |
Signal to noise ratio S/N | -60dB |
Spead change | manual |
The length of the active arm | 40mm |
Mass of the arm | 30g |
Tracking error | 0 |
Anti-skating | 0 |
Height Adjustment (VTA) | + / – 10mm |
Arm Height Adjustment range | +/- 5 |
Platter Height Adjustment | +/- 8mm |
Platter weight/ diameter / height | 3kg / 310 / 40 |
Dimensions | 450 x 350 x 180 |
Weight | 20kg |
Power supply | 110V-240V / 50Hz-0Hz |
Power consumption | 2W |